GMSG11SO

About the GMSG11SO

The GMSG11SO controller is part of the Graphite HMI Expansion Modules Series. This specific controller was produced by Red Lion. The inputs for this module are two strain gauge inputs. The operating inputs of this controller are ±20 mv, ±33 mv, or ±200 mv depending on what actions the controller is performing. The control outputs of this controller are 3 SSRs which operate at 0/4 to 20 mA or +/- 10 V. 

This controller has a number of special features which include but are not limited to sending SMS notifications and emails to notify the user of alarm conditions, providing built-in data logging through an SD Card, FTP, and web server usage for remote access, and Crimson Control modules which allow for enhanced IEC 61131 logic controller programming. The Crimson software used with the GMSG11SO controller allows for data tagging as well as creative intuitive interfaces that are virtually self-explanatory and much easier to use. 

Information on the GMSG11SO controller is limited due to no longer being actively produced by Red Lion, the above information is found in a general Red Lion HMI Brochure which is linked above under the manuals tab on this page. If you have any questions regarding the availability of this controller please contact AX Control’s sales department by phone at (919) 372-8413 or by email at sales@axcontrol.com.